Publicité
Les langues disponibles
Les langues disponibles
Automatic oven cleaning
WARNING!
Before pyrolytic cleaning, wait for the oven to cool down and remove all equipment and
accessories from it, including the guides (depending on the model).
This function uses high temperature to make it easier to clean the appliance interior and some of the
supplied equipment (all-purpose deep baking tray, shallow baking tray).
During the cleaning process, fat residues and other impurities are incinerated and reduced to ashes.
There are three pyrolysis (cleaning intensity) levels available, with varying duration of the process:
Level
Cleaning intensity
1
Quick cleaning
2
Medium-intensity cleaning
3
Intensive cleaning
INFORMATION!
The more stubborn the dirt, the higher the level that should be selected.
Preparing for pyrolytic cleaning
•
Remove all visible dirt and food residue from the oven cavity.
•
Always remove the guides and all unnecessary equipment from the appliance.
•
Always start the pyrolysis process when the appliance has cooled down.
•
Unpleasant odours and smoke can be released during the pyrolysis process, as well as irritant
fumes and gases. Therefore, ensure adequate ventilation of the room and do not stay in the room
for too long. Do not allow children or pets near the oven during this process.
•
When the pyrolytic cleaning process is complete and the oven has cooled down, the oven door
will be unlocked automatically.
36
pyrolysis
Cleaning purpose
For minor impurities
For noticeable major impurities
For stubborn and persistent
(older) impurities
1. Touch the extra bake key to display extra functions on the display
unit. Rotate the KNOB so that the symbol
your selection. Three cleaning intensity levels will appear on the display.
Rotate the KNOB to select the cleaning intensity level. The more stubborn
the dirt, the higher the level that should be selected. Medium level is
selected as the default setting.
Confirm your setting by pressing on the KNOB. Touch the start I stop
key. Time starts counting down.
2. After a certain period of time, oven door will be automatically locked
for your safety. Loc will appear on the display unit while the lock is
engaged.
3. When the program is completed, End will appear on the display unit
and an acoustic signal will be emitted.
Program duration
2 hours
2.5 hours
3 hours
and P are lit up, and confirm
Publicité
