Thermador ME302YP Mode D'emploi page 6

en-us
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
1.7 Cleaning function
Follow these safety instructions when using the cleaning
function.
WARNING
Do not block the oven vent(s) during the self-cleaning
cycle. Doing so may cause injury or damage to the
appliance.
WARNING
During the elimination of soil during self-cleaning, small
amounts of carbon monoxide can be created and the
fiberglass insulation could give off very small amounts of
formaldehyde during the first several cleaning cycles.
▶ To minimize exposure to these substances, provide
good ventilation with an open window, or use a
ventilation fan or hood.
The oven heats up to a very high temperature during self
cleaning. Opening the door can result in injury.
When self-cleaning, confirm that the door locks and will
▶
not open.
If the door does not lock, do not run Self Clean. Contact
▶
Customer Service.
WARNING
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶ Never touch the appliance door.
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
WARNING
Do not leave food or cooking utensils, etc., in an oven
during the pyrolytic self-cleaning mode of operation.
CAUTION
Remove broiler pans, pots, and other utensils and excess
spillage before self-cleaning.
CAUTION
Birds have very sensitive respiratory systems.
▶ Keep pet birds out of the kitchen or other rooms where
kitchen fumes could reach them.
During self clean, fumes are released that may be
▶
harmful to birds.
WARNING
Do not clean the door gasket – The door gasket is
essential for a good seal. Care should be taken not to rub,
damage, or move the gasket.
6
WARNING
Do not use a protective coating to line the oven and do not
use commercial oven cleaner.
Clean only parts listed in this manual.
Please note that some pets or humans can be sensitive to
the odors created during the self-cleaning process
whether it is a manufacturing residue burn off or food. It is
recommended that those potentially affected be removed
from the kitchen area during the self-clean process.
1.8 Proper installation and maintenance
See the Installation Guide for electrical requirements,
grounding instructions and clearance to combustible
material requirements.
WARNING
In the event of a malfunction, it might become necessary
to turn off the power supply.
Have the installer show you the circuit breaker or fuse.
▶
Mark it for easy reference.
To avoid electrical shock hazard, before servicing the
appliance, turn power off at the service panel and lock the
panel to prevent the power from being switched on
accidentally.
Proper Installation - Improper installation or grounding can
cause electric shock.
▶ This appliance must be properly installed and grounded
by a qualified technician.
▶ Connect only to properly grounded outlet.
▶ Refer to installation instructions for details.
User Servicing - Do not repair or replace any part of the
appliance unless specifically recommended in this
manual.
▶ All other servicing should be referred to an authorized
service provider.
Light socket is live when door is open if main power
supply is not turned off.
▶ Turn off main power supply at the service panel before
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
▶ The lenses must be in place when using the appliance.
▶ The lenses serve to protect the light bulb from breaking.
▶ The lenses are made of glass. Handle carefully to avoid
breaking. Broken glass can cause an injury.