Thermador ME302YP Mode D'emploi page 19

9 Basic settings Basic settings
You can configure the basic settings for your appliance to meet your needs.
Basic settings
9.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features of
your appliance.
Basic settings
Menu Description
item
Home Connect®
1 Temperature unit
2 Display brightness
3 Volume
4 Clock mode
5 Auto convection conversion
Decreases the set oven temperature by 25°F for convection bake and
convection true convection heating modes.
6 Button beep
Tone when a button is pressed.
7 Standby clock display
8 Language
9 Temperature offset
Sets the temperature offset value for bake, convection bake, roast,
convection roast and true convection. When an offset value is entered,
the actual oven temperature is increased or decreased by this value.
This feature is useful if food is either too brown or too light.
1 Factory setting (may vary according to model)
9.2 Changing the basic settings
Press SETTINGS.
1.
The display shows "HOME CONNECT SETTINGS".
a
Press SETTINGS to enter the settings menu.
2.
Press SETTINGS to cycle through the settings list.
3.
Press ENTER to access the menu for a setting.
4.
Enter the desired value with the numeric keypad.
5.
The new value is automatically accepted as the display
a
reverts from edit mode back to standby mode.
Press CLEAR/OFF to leave the basic settings menu.
6.
Settings
→ "Home Connect® ", Page 20
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
Between +/- 35°F (+/- 19 °C) in
1° increments
0 1
9.3 Oven temperature offset
The oven is calibrated to provide accurate results. This
feature is useful if you prefer your foods lighter or darker.
When an offset temperature is selected, the actual oven
¡
temperature is raised or lowered by this value.
Do not use residential oven thermometers to evaluate
¡
oven temperatures as they will fluctuate throughout
cooking.
You can set a temperature offset from the factory
¡
baseline. Each time you call up the temperature offset
option in the basic settings menu, the factory baseline
temperature is restored so you can set a new offset
value.
Basic settings en-us
°F (Fahrenheit) 1
°C (Celsius)
1
High
Medium
Low
1
High
Medium
Low
1
12-hour/12HR
24-hour/24HR
On
Off 1
On 1
Off
On 1
Off
EN 1
FR
19