Télécharger Imprimer la page

Thermador ME302YP Mode D'emploi page 15

Masquer les pouces Voir aussi pour ME302YP:

Publicité

Les langues disponibles

Les langues disponibles

Tilt the front of the rack up about 3/4'' (2 cm)
2.
finish pushing the rack all the way back
Note: Avoid striking the oven light cover glass when
pushing the rack into position.
The back of the telescopic rack drops in to place.
a
Pull the rack forward to engage the bottom of the rack
3.
onto the rear of the rack position guide.
Lower the front of the rack to finish seating it on the rack
4.
guide. The rack should feel stable when properly
seated.
Slide the movable part of the telescopic rack in and out
5.
a few times to make sure it is able to move freely and
that the non-moving part of the telescopic rack is
securely anchored.
Removing a telescopic rack
Lift the front of the telescopic rack assembly about 1/ 2''
1.
(1 cm) and push the rack to the rear about 3/4'' (2 cm).
The rack can disengage from the rack position guide.
a
Lift the rear of the telescopic rack assembly so it clears
2.
the rack position guide and gently pull the rack from the
oven.
Note: Do not pull the rack unevenly, this will cause it to
bind during removal, catching on the oven walls.
6 Before using for the first time
Before using for the first time
Carry out these steps before using your appliance.
Before using for the first time
The appliance must be properly installed by a qualified
¡
service provider before use.
Read and understand all safety precautions →  Page 3
¡
and information in the Use and Care Guide prior to
operating.
Download the Home Connect® (America) app to
¡
remotely control your appliance, get cooking inspiration,
and access service tips and support.
→  "Home Connect® ", Page 20
This Use and Care Guide covers several models. Not
¡
all features are available on all models.
and
6.1 Cleaning the appliance before using it for
⁠ .
the first time
Clean the oven cavity and accessories before using the
appliance to prepare food for the first time.
Remove all packaging materials from the oven cavity.
1.
For double ovens, check both oven cavities.
Before heating the appliance, wipe the smooth surfaces
2.
in the oven cavity with a soft, damp cloth and dry.
Keep the room ventilated while the appliance is heating.
3.
Set the heating mode and temperature.
4.
Heating mode
Temperature
Duration
Switch off the appliance after the specified cooking
5.
time.
Wait until the oven cavity has cooled down.
6.
Clean the smooth surfaces with soapy water and a dish
7.
cloth.
Clean the accessories using soapy water and a dish
8.
cloth or soft brush.
Note: There may be a slight odor during first uses. This is
normal and will disappear.
6.2 Setting the clock
The oven includes time functions that require the current
time to be set.
Tip: Activate Home Connect® to set and maintain the
clock automatically.
Setting the clock
Requirement: The oven is in standby mode.
Press CLOCK.
1.
The display shows "SET CLOCK".
a
Press ENTER.
2.
Use the numeric keypad to enter the desired time.
3.
The numbers fill in from right to left. To enter 10:45,
type 1, 0, 4, 5.
Press ENTER.
4.
6.3 Pairing your oven with Home Connect®
In order to utilize the full feature potential of the appliance,
download the Home Connect® (America) app on a smart
device and pair the appliance to the home's Wi-Fi device.
For step-by-step instructions, see
→  "Home Connect® ", Page 20 .
Before using for the first time en-us
BAKE
475°F (245°C)
30 minutes
15

Publicité

loading

Ce manuel est également adapté pour:

Me301yp