Thermador ME302YP Mode D'emploi page 20

en-us Home Connect®
9.4 Auto convection conversion
Convection bake and convection multi-rack modes require
a 25°F reduction in temperature. Auto convection
conversion reduces the temperature you enter
automatically.
Simply enter the package or recipe temperature when
¡
setting the mode. The control calculates the correct
temperature and it is shown in the display.
10 Home Connect® Home Connect®
This appliance may be network-capable. Connecting your
Home Connect®
appliance to a mobile device lets you control its functions
via the Home Connect® app, adjust its basic settings and
monitor its operating status.
The Home Connect® services are not available in every
country. The availability of the Home Connect® function
depends on the availability of Home Connect® services in
your country. You can find information on this at:
www.home-connect.com.
The Home Connect® app guides you through the entire
registration process. Follow the instructions in the
Home Connect® app to implement the settings.
Tips
Consult the Home Connect® documents supplied.
¡
Follow the instructions in the Home Connect® app as
¡
well.
Notes
Also note the safety information in this instruction
¡
manual and ensure that it is also observed when
operating the appliance using the Home Connect® app.
Operating the appliance on the appliance itself always
¡
takes priority. It is not possible to operate the appliance
using the Home Connect® app during this time.
In networked standby mode, the appliance requires a
¡
maximum of 2 watts.
10.1 Setting up Home Connect®
Requirements
The appliance is connected to the power supply and is
¡
switched on.
You have a mobile device with a current version of the
¡
iOS or Android operating system, e.g. a smartphone.
The mobile device and the appliance are within range of
¡
your home network's WLAN signal.
Download the Home Connect® app.
1.
Open the Home Connect® app and scan the following
2.
QR code.
20
Follow the instructions in the Home Connect® app.
3.
10.2 Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect® has been
set up and whether the appliance is connected to your
home network.
10.3 Changing the settings via the
Home Connect® app
You can use the Home Connect® app to change the
appliance settings and send them to the appliance.
Prerequisits for using the Home Connect®:
The appliance is connected to the home network and to
¡
the Home Connect® app.
In order to set the appliance via the app,
¡
Home Connect® must be activated in the basic settings.
Activate Home Connect ON in the oven basic settings.
The oven must be turned on.
¡
10.4 Remote start
If you want to start an oven operation using your mobile
device, you must activate Remote Start.
WARNING
REMOTE OPERATION This appliance is configurable to
allow remote operation at any time.
Do not store any flammable materials or temperature
▶
sensitive items inside, on top or near surface units of
the appliance.
Notes
For some models a permanent Remote start can be
¡
activated via the Home Connect® app. This function
allows a remote start of the available operating modes
without automatically deactivating Remote start.
Remote start can only be activated if the
¡
Home Connect® set-up has been successfully
completed.
Some operating modes can only be started on the oven
¡
itself.
Setting remote start
Select REMOTE START.
▶