Menu Navigation - OHAUS PAJ Série Manuel D'instruction

PAJ-N Series
the accuracy of the count. The balance automatically recalculates the Average Piece Weight when the number
of parts on the pan is less than three times the original sample size. The display shows [APwW.OPT] each time
the APW is optimized.
3.4 Weigh Below Feature
Remove Weigh Below Cover
4. SETTINGS

4.1 Menu Navigation

InCal*
FILTER
SPAN
A.TARE
LINEAR**
GBL RST
CAL ADJ*
END.SET
END.CAL
* InCal models only
** Not available with InCal
ENTER MENU - When the balance is on, press and hold Unit/Menu until [mMENU] appears. Release the button
and the Calibrate [.CAL.] menu will display.
MENU NAVIGATION - Select menus, menu items and settings through use of the Yes and No buttons. Solid
arrows point to the content displayed when Yes is pressed, Dashed lines when No is pressed.
CHANGE SETTINGS - To select the displayed Setting, press Yes. To move to the next Setting, press No.
EXIT MENU - When [.END.] is displayed, press Yes to exit the menu function, or press No to return to the Cal
menu. Note: Press and hold No at any time to exit quickly.
Attach wire or string to Hook
GRAM
COUNT
MILLIGRAM
APWOPT
END.MOD KILOGRAM
OUNCE
POUND
NOT ALL
UNITS
SHOWN
NO
YES
END.UNIT
Suspend sample
BAUD
A. PRINT
PARITY
CONTENT
HAND.SH
LINE FO
END.R232
END.PRT
EN-4
CAL
SETUP
MODE
UNIT
PRINT
RS232
END.LOCK