Würth 5701 402 00 Traduction Des Instructions De Service D'origine page 31

vapours may be emitted. Provide for fresh air and
seek medical help in case of complaints. The
vapours can irritate the respiratory system.
Use the battery only in conjunction with your Würth
power tool. This measure alone protects the battery
against dangerous overload.
Use only original Würth batteries with the voltage
listed on the nameplate of your power tool. When
using other batteries, e. g. imitations, reconditioned
batteries or other brands, there is danger of injury
as well as property damage through exploding
batteries.
Use only original Würth accessories.
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual
risk factors. The operator should pay particular and
additional attention to these points in order to reduce
the risk of serious personal injury.
or abrasive particles may enter the eyes and
cause severe permanent damage. Wear goggles
approved for grinding operations whenever you
use the product.
Injury caused by vibration – Limit exposure and
take regular breaks.
Injury caused by dust – Wear appropriate dust
against particles from the material being worked
on and abrasive particles from the grinding disc.
Do not eat, drink, or smoke in the work area. Ensure
adequate ventilation.
Injury from contact with the grinding disc – The
disc and workpiece will become hot during use.
Wear gloves when changing discs or touching
workpiece. Keep hands away from the grinding
area at all times. Clamp the workpiece whenever
possible.
Injury caused by noise – Prolonged exposure to
noise will increase the risk of hearing damage, and
for any extended period of time, wear hearing
protection.
Cordless Angle Grinder
Article number
Voltage
Rated speed
Spindle thread
Grinding wheel capacity
Thickness of grinding wheel
Inner diameter of wheel
Weight - not incl. battery pack
Weight (According to EPTA
procedure 01/2003)
Ambient operating temperature
for the tool and battery pack
Ambient storage temperature
for the tool and battery pack
Recommended ambient
charging temperature
Recommended battery type
Recommended charger
Know Your Product
See page 3.
1. Spindle lock button
2. Handle, insulated gripping surface
3. Trigger switch
4. Dust cover
5. Grinding wheel (not included)
6. Guard lever lock
7. Wheel guard
8. Side handle, insulated gripping surface
AWS 18-125 P
COMPACT
5701 402 00X
18 V/DC
11000 min
-1
M14
125 mm
6 mm
22.2 mm
2 kg
2.7 kg
0 - 40°C
0 - 27°C
5 - 40°C
LI 18V/4Ah
BASIC
ALG 18/4
BASIC
31