Auriol 337063 2001 Instructions D'utilisation Et Consignes De Sécurité page 52

TIP: Pressing and holding the UP button or the DOWN- /
will quickly scan ahead or back through the numbers.
ATTENTION: When no buttons are pressed for approx. 20 seconds
the main station will return to base mode.
Briefly pressing the SET/HISTORY button will confirm the setting
and switch to the next option in the clock settings.
This allows you to change the following settings in sequence:
Note: If the main station has received the DCF signal the year, month,
day, hour and minute settings will remain unchanged. If you are in a
different time zone than Germany you may set your local time under
time zone.
Year
Month
Day
Language setting for displaying the weekday at the bottom
right of the clock display.
The following codes will flash and can be changed in the
following sequence by pressing the UP / DOWN button:
GE (German), DA (Danish), ES (Spanish), NE (Dutch),
FR (French), IT (Italian), EN (English)
Clock format: select from 24 Hr for 24-hour format (0:00 o'clock
–23:59 o'clock). 12 Hr indicates the 12-hour format (1:00 o'clock
–12:59 o'clock). In 12-hour mode the time from 12:00 o'clock in
the afternoon until 11:59 o'clock at night will show PM (Latin for
"post meridiem" = after noon) in the display.
Hour
Minute
Time zone: The time zone can be set ranging from
+12 to –12 hours.
52 GB/IE
button