Bosch MUMS6EW22 Manuel D'utilisation page 35

Troubleshooting
11 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
working.
Appliance does not
start processing.
Appliance does not
start processing or
switches off during
processing.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your room or other
▶
appliances are working.
Rotary switch is set incorrectly.
Set the rotary switch to
▶
Processing quantity is too big or processing time was
too long.
Set the rotary switch to
▶
Reduce the quantity of ingredients.
▶
Allow the appliance to cool down to deactivate the
▶
overload protection device.
Appliance or accessory is blocked.
Set the rotary switch to
▶
Remove the blockage.
▶
Swivel arm is not engaged properly or has become
detached.
Set the rotary switch to
1.
Move the swivel arm until it engages correctly.
2.
Troubleshooting en
before processing.
⁠ .
⁠ .
⁠ .
35