SilverCrest SZP 25 D4 Mode D'emploi page 10

Operation
WARNING! RISK OF INJURY!
► Unplug the mains socket from the wall outlet before assembling, disassembling
and when not in use.
Do not touch the pressing cone 2/3 while it is turning and do not hold
►
any items of cutlery or other objects against rotating components. Keep your
clothing and hair away from all rotating parts.
Assembling the appliance
Before first use, clean all parts of the appliance as described in the section
"Cleaning".
If necessary, unwind the connecting cable from the cable retainer w.
Place the base q on a dry and level surface.
Assemble the sieve attachment 4/5. To do this, place the two parts on
top of each other in such a way that the selector switch 6 juts through the
corresponding opening of the upper part 4 (Fig. 1). Push the two sections
together until they click together.
Push the small pressing cone 3 into the sieve attachment 4/5 until it audibly
clicks into place.
If you want to process larger citrus fruits like oranges or grapefruits, use the
large pressing cone 2. Place it onto the small pressing cone 3 so that the
tabs on the small pressing cone 3 lie in the notches of the large pressing
cone 2. Push in the large pressing cone 2 firmly until it clicks into place.
Place the sieve attachment 4/5 together with the pressing cone 2/3 onto
the juice container 7 so that the part with the selector switch 6 lies over the
handle 8 of the juice container 7.
Place the cover 9 onto the drive shaft 0 and press it firmly into place.
Place the juice container 7 onto the base q and turn the juice container 7
in the direction of the arrow until it clicks into place.
Insert the plug into a mains power socket.
The appliance is now ready for use.
SZP 25 D4
Fig. 1
GB │ IE │
7 ■