Publicité
Les langues disponibles
Les langues disponibles
Risk of damage of the
product
Only use the specified type of
battery / rechargeable battery!
Insert batteries / rechargeable
batteries according to polarity
marks (+) and (-) on the battery /
rechargeable battery and the
product.
Use a dry, lint-free cloth to clean
the contacts on the battery / re-
chargeable battery and in the
battery compartment before
inserting!
Remove exhausted batteries /
rechargeable batteries from the
product immediately.
Before first use
Q
Note: Remove all packaging materials from the
product.
1. Turn the product over and place it on a soft
underlay to avoid scratching the surface.
2. Loosen the screw located at the cover of the
battery compartment
product by using a screw driver.
3. Open the cover of the battery compartment
4. Remove the insulating strip from the battery
compartment
.
8
5. Close the cover of the battery compartment
and tighten the screw by using a screw driver.
Replacing battery
Q
1. Turn the product over and place it on a soft
underlay to avoid scratching the surface.
on the back of the
8
8
8
2. Loosen the screw located at the cover of the
battery compartment
duct by using a screw driver.
3. Open the cover of the battery compartment
4. Remove the used battery from the battery
compartment
5. Insert the new battery (as specified in section
„Technical data").
Note: Make sure you insert the battery with the
correct polarity. This is indicated in the cover of
the battery compartment
6. Close the cover of the battery compartment
and tighten the screw by using a screw driver.
Operation
Q
Weighing
Q
Note: Starting with or without the weighing bowl
the product always starts at zero reading (the tem-
perature will also be shown) when you switch it on.
Note: Zero reading means 0 in g or 0:0.0 in lb:oz
or 0.00 in oz.
However, if you place the weighing bowl
product after you have switched it on, the product
will indicate the weight of the weighing bowl
Press the TARE button / Timer button
the numerical display
symbol
will appear.
13
Place the weighing bowl
Press the ON / OFF button
product on.
Select the unit of weight by pressing the unit of
weight button (UNIT) / Timer button
.
each time it is pressed, the unit display
switch to the next unit listed: kg / g -> lb / oz -> oz.
Place the food you wish to weigh in the weigh-
ing bowl
.
1
The LCD readout
food in the selected unit of weight.
Important! Be sure never to add more than 5 kg
to the weighing bowl
can damage it.
on the back of the pro-
8
.
8
.
8
1
6
to zero reading. The TARE
9
on the product.
1
to switch the
2
indicates the weight of the
4
. Overloading the product
1
GB/IE/NI
.
8
8
,
1
on the
.
1
to reset
. After
5
will
11
9
Publicité
