Technical Specifications - Hudora 76900 Instructions De Montage Et Mode D'emploi

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral com-
ponent of the product. Therefore, please store them and the packaging carefully
in case questions arise in the future. Please always include these instructions
when giving the product to a third party. This product must be assembled by an
adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Soccer goal Freekick with target shot
Item number: 76900, 76922
Dimensions when assembled: 213 x 152 x 76 cm
Purpose: Soccer goal for versatile shooting and goalkee-
per training.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/service/.
CONTENTS
20 Goalposts
1 Goal net
5 Tent pegs (for stand fixing)
6 Tent pegs (for fixing the target shot)
1 Screw set
4 Cords
1 Target shot
1 Manual
Other items included are meant to facilitate safe transportation and are not re-
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months due to long cords!
Strangulation Hazard.
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connection for stability and fit. Any sharp edges that might have formed must
immediately be removed!
• Warning: do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
INSTRUCTIONS ON ASSEMBLY
Notice: Lubricate the connection assemblies on the narrow ends a bit before
starting the assembly. That facilitates the assembly and extends the durability
of the product!
1. Assembly of the goal frame
Assemble the goal frame as indicated in fig. 1. Observe that you use the respec-
tively numbered tubes.
2. Assembly of the goal net
The little flags sewed in the net indicate the upper goal corners. Fasten the goal
net on the goal frame by fastening the hook and loop fasteners sewed in the net
firstly on the tube parts 9 to 12. Then thread the cord as indicated in fig. 2 around
the tubes and knot the loose ends.
3. Assembly of the target shot
Spread the target shot and fasten it on the crossbar and the sides of the goal
frame by means of the rubber cords and plastic clips; then secure with pegs the
bottom line on the ground as indicated in fig. 3. Pay attention that the clips are on
the back side of the target shot so that they cannot be hit by the ball.
All images are examples of the design.
4. Stand locking of the goal
Finally fix the goal frame by means of the pegs on the ground. Ascertain that the
ground is suitable for the application of pegs (e.g. no water pipes for sprinkler
devices!). Make sure that the pegs are completely driven into the ground and
have firm position. Avoid protruding fastenings (risk of stumbling). On too hard
grounds the goal must be saved by appropriate measures in another way against
overturning in order to prevent risk of injuries. Never play with an unsecured goal
or never leave the goal unsecured respectively.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it
in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/service/.
4/8