Intended Use - VOLTCRAFT V-CHARGE ECO 6X 1S Notice D'emploi

3. Intended use

The charger has 6 charging channels each for a 1-cell LiPo or
LiHV battery. Only one battery may be connected to each charging
channel. The charging current can be adjusted between 0.1 and
1.0 A. Each channel has a charging power of max. 4.35 W.
The charger may `be powered via either via an XT60 connection
(3 - 4-cell LiPo/LiHV battery) or a round socket (input voltage 9 -
15 V/DC) (only one of the two connections may be used).
For safety and approval purposes, you must not rebuild and/or
modify this product. Using the product for purposes other than
those described above may damage the product. In addition,
improper use may cause hazards such as a short circuit, fire or
electric shock. Read the operating manual carefully and store them
in a safe place. Only make this product available to third parties if
accompanied by the operating manual.
This product complies with statutory, national and European regu-
lations. All company and product names are trademarks of their
respective owners. All rights reserved.
37