Connection Diagram; Audio Setup - M-Audio AIR 192/4 Guide D'utilisation

Connection Diagram

Items not listed under
Powered Monitors
Computer
Note:
•
Remember to select AIR 192|4 as your interface in the Preferences, Options, Device
Setup, etc. in your digital audio workstation (DAW).
•
Use the +48V (Phantom Power) Switch only if a microphone requires phantom power.
Most dynamic microphones and ribbon microphones do not require phantom power, but
most condenser microphones do. Consult your microphone's documentation to find out
whether it needs phantom power. When using the included NOVA Black microphone, turn
the +48V (Phantom Power) Switch on.

Audio Setup

Windows users: Before connecting AIR 192|4 to your computer, install the driver:
1. Go to m-audio.com/drivers
system.
2. Open the file you downloaded and double-click the driver installer file.
3. Read the End-User License Agreement, then check the box to Agree and click Next to
continue.
4. Click Install to begin the installation. You may be asked to connect AIR 192|4 to your
computer during the installation process. Click Install on any further system messages
during the installation.
5. Once the installation is complete, click Finish.
To use the Windows driver, open the M-Audio AIR 192|4 Control Panel. Here, you can set
your Preferred Buffer Size and Sample Rate.
4
Introduction > Box Contents
Microphone
Rear Panel
and download the latest AIR 192|4 driver for your operating
are sold separately.
Guitar
Front Panel
Headphones