Panasonic CQ-R235U Manuel D'utilisation page 22

Installation Guide continued)
c) Remove the removable face plate by Contacts
pulling on the right side of the unit. Place
the removable face plate in a supplied
case.
Main Unit
Security
side of the case and open its cover. Keep
the removable face plate in the case.
Then you can safely take the plate with Removable Face
you. Plate Case
To install the Removable Face Plate Fig.6
a) Slide the left side of the removable face plate in place.
b) Press the right end of removabie face plate until a
"click" is heard.
Tab
Removable Face
Plate a "3
Cutout
Cautions:
1. Before removing the removable face plate, make sure the power is off.
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removable face plate on the dashboard or nearby areas where the temperature rises to
high levels.
5. Do not touch the contacts on the removable face plate or on the main unit, since this may result in poor
electrical contacts.
. If dirt or other foreign substances get on the contacts, wipe them with a clean and dry cloth.
Security Indicator
The security indicator blinks when the removable face plate is removed from the unit.
To Deactivate Security Indicator
Press and hold [SEL] for more than 2 seconds when the power is ON. "LEd" "OFF" is displayed, and the secu-
rity indicator turns off. (Default: LED ON)
Display Security Indicator
"LEd" "ON" Blinks
ty (Press and hold [SEL] for more than 2 seconds.)
"LEd" "OFF" OFF
Cautions: When you want to remove the unit, the security indicator functions can be canceled by the fol-
lowing procedure.
e install the removabie face plate.
e Disconnect the power connector for more than 3 minutes and then reconnect it.
CQ-R235U