Panasonic CQ-R235U Manuel D'utilisation page 21

To remove the trim plate (for Japanese Cars)
You may not be able to install this unit in some makes of Slit
Japanese cars. In such a case, consult your dealer or profes-
sional installer.
To mount this unit on a Japanese car, first cut the 9 slits in
back of the trim plate with side-cut pliers, remove the trim
plate, then mount this unit.
If you find a trim plate necessary after mounting the unit inside,
use the supplied Trim Plate ©.
To Remove the Unit
a) Remove the removable face plate. (See Anti-Theft System below.)
b) Pull out the unit while pushing the lock lever using Dismounting Plate © .(= Fig.1, 2)
c) Remove the unit by pulling it with both hands. (= Fig.3)
Lock Lever
Fig.2
Lock Lever
ismounting
late
DD
P
Note: Do not lose the Dismounting Plate. It will be needed to remove the unit from the car's dashboard.
Anti-Theft System
This unit is equipped with a removable face plate. By removing this face plate, the radio becomes totally inop-
erable. The security indicator will blink.
To Remove the Removable Face
Plate
a) Switch off the power.
b) Press the release button ( è
The removable face plate will be released.
CQ-R235U
E
N
G
L
|
S
H
_ mn
21