Panasonic CQ-R235U Manuel D'utilisation page 15

Clock Basics
The 12-hour system is
used for the clock.
Initial Time
O) Press [D](DISP). "AdJ" appears on the
display.
@ Press and hold [D}{DISP) again for more
than 2 seconds. "12" blinks, and the time
setting mode is activated.
@ Press [<TUNE] or [>TUNE] to set the
hour.
@ Press [D](DISP) again to proceed with the
minutes setting.
© Press [<TUNE] or [>TUNE] to set the
minute.
Press and hold [<< TUNE] or [>TUNE] for
more than 0.5 seconds to change num-
bers on the display in sequence.
© Once the time has been set, press
[DJ(DISP).
Note: The [D]{DISP) botton will not work while the CD changer is set to
the scan play mode. Cancel the scan play mode before pressing
[D](DISP).
Press and hold ea Time Reset
Press and hold [D](DISP) for more than 2 seconds to activate the time
setting mode to reset the time. Then, repeat step @ to © above.
Clock Display
Press [D](DISP).
CQ-R235U 15