Publicité
Les langues disponibles
Les langues disponibles
N IM-rozm
Cassette Tape Player Basics (continued)
TPS Operation (Tape Program Search)
© Press [3](TPS) to activate the tape program search mode.
© To select a desired program, press [P*+TRACK] or [««TRACK] cor-
responding times to go forward (up to 9) or backward (up to 8).
(Rewind:)
(Fast forward:)
Ex1. To select the current program again,
press [3](TPS) and [+4TRACK].
Ex2. To select the last program,
press
[3]{TPS) and [44TRACK] twice.
Ex3. To select the next program,
press
[3](TPS) and [>> TRACK].
Ex4. To
select
the
next
3rd
program,
press
[3](TPS)
and
[»»TRACK]
three times.
O) Press [3](TPS) again to cancel.
Notes:
The TPS mode may not work correctly in the following cases. This, how-
ever, does not mean that the unit is defective.
e There is an interval less than 4 seconds or having a high level of noise
or hum between programs.
e There is particularly low-level passage during the program.
Notes on Cassette Tapes
Tape Slack:
Label
Use a pencil or similar object to take up the slack as
shown. If a loose tape is used, this may result in the
tape becoming tangled in the rotating parts of the
product.
Pencil
Do not
touch nor
pull out the
tape.
CQ-R235U
Publicité
