Festo DG - GA Série Notice D'utilisation page 10

DGxx-...-GA
2 Method of operation and application
The protected guide of the linear axis covers all profile undercuts on the linear
axis guide.
It provides an easy-to-clean surface.
The cover section protects the guide against falling particles and dust.
The dirt-protected linear axis guide has been designed as a variant and is fitted at
the factory to linear axes of types DGE(L)-...-KF, DGP(L)-...-KF and DGPI(L)-...-KF.
3 Conditions of use
Please note
S Make sure that the specifications in this section are always observed.
The product will then function correctly and safely.
S
Compare the maximum values specified in these operating instructions with
your actual application (e.g. forces, frequencies, masses, temperatures,
speeds).
The product can only be operated in accordance with the relevant safety guide-
lines if the maximum loading limits are observed.
S
Take into account the ambient conditions
at your location.
Corrosive ambient conditions can impair
the service life of the product.
S
Please observe the regulations applicable
to your location (e.g. local and national
laws and regulations).
S
Use the product in its original state without undertaking modifications.
10
[°C] [%] [mbar]
Fig. 2
Festo DGxx-...-GA 0102NH English