Gram Scientific COMPACT 600 Mode D'emploi page 36

If the cabinet is not turned on when connecting it to main supply, the display will show oFF.
To turn the cabinet on, push and hold
The controller starts up in normal operation mode displaying the current cabinet
temperature.
The refrigeration system will follow the factory default set temperature:
For refrigerators (R and GR) the set temperature is 5°C (adjustable from 2 to 12°C)
For refrigerators with extended temperature range (M) the set temperature is 5°C
(adjustable from -5 to 12°C)
For freezers (F) the set temperature is -18°C (adjustable from -10 to -22°C)
To turn the cabinet off, push and hold
Control lights
The following control lights are located on the display:
Compressor symbol. This LED is on while the compressor is running. Flashes
during temperature setting.
Defrost symbol. This LED is lit constantly during the defrosting cycle.
Evaporator fan symbol. This LED is on while the evaporator fan is running.
Temperature alarm symbol. This LED is on if a temperature alarm occurs.
Keylock
When is lit the display keys are locked.
To unlock the keys:
Push and hold any key for 5 seconds to unlock the controller keys. When the controller has
been successfully unlocked,
Automatic keylock:
Not touching the controller for two minutes, will automatically activate the keylock.
Adjusting the cabinet temperature
To change the set temperature, push
shown in the display, with one decimal place after the comma.
Push or to change the temperature set point. The new set point temperature is
confirmed/saved by pushing
765042499
for 5 seconds.
for 5 seconds.
turns off.
once,
once. The display returns to normal operation.
Rev. 001
flashes, and the current set point is
36