Magmaweld megaMIG 521M0200M0 Manuel D'utilisation page 32

32 Annex
5.2 Fine Settings in the Wire Feeding Unit
1- Free Wire Feed Button : As long as the button is pressed, the wire feed operation is performed, the gas
EN
valve won't work. This button can be used to feed the wire to the torch.
2- Free Gas Button : As long as the button is kept pressed, gas flow is provided but wire would not feed. This
button can be used to change the gas in the system after the gas change.
USER MANUAL
megaMIG
www.magmaweld.com