Magmaweld megaMIG 521M0200M0 Manuel D'utilisation page 30

30 Maintenance and Service
E28
Error Code
EN
E29
E30
E31
USER MANUAL
System Error • There may be a hardware error
Error
DC Busbar
• Mains voltage may have decreased
Voltage Low
DC Busbar
• Mains voltage may have increased
Voltage High
System Error • There may be a hardware error
• Contact the authorized service
Cause
• Check the mains connection cables
• Check the mains connection cables
• Contact the authorized service
Solution
and the voltage. Make sure the
correct voltage input is providevd.
If the mains voltage is normal,
contact the authorized service
and the voltage. Make sure the
correct voltage input is provided.
If the mains voltage is normal,
contact the authorized service
www.magmaweld.com
megaMIG