Futurelight AS-200 Advertising Scan Mode D'emploi page 28

The different functions are:
Overview over the function-mode
Remark: For a detailed description of how to program, please refer to the next section.
Press the Program-button.
Select the desired program via the Up-/Down-buttons.
Press the Step-button.
Remark: If a step has already been programmed, the settings of this step will be displayed.
Select the desired step via the Up-/Down-buttons. This is only possible if several steps are available.
Press the Function-button. The display shows P_ _ _ (and the current DMX-value).
Please adjust the desired settings via the Up-/Down-buttons.
All further functions can be selected by pressing the Function-button several times.
Remark: For the DMX-values of the individual DMX-channels, please refer to the tables further below.
Press the Enter-button in order to save the settings.
Select the next step via the Step-button and the settings of the first step will be copied to the second.
Caution: If the next step has already been programmed, pressing the Step-button will delete the settings.
If you do not wish to overwrite the next step, you have to select the next step via theUp-/Down-buttons. If there
is no further step available, you have to press the Step-button.
Press the Function-button and adjust the settings like described above.
Via the Up/Down-buttons, you can check the programmed steps.
Caution: As soon as you press the Enter-button, you will finish the current program. All higher steps,
which have already been programmed, will be deleted.
At the end of the program press the Enter-button and the display will show „." after the last number.
Recalling the manufacturer's programs
After the programs have been edited, these can also be set back to the manufacturer's program suggestions.
Press the Program-button.
Hold the Function-button and the display shows „LOAD".
Press the Enter-button.
Example for programming the individual settings:
P___ PAN - movements
T___ TILT - movements
G___ Gobowheel / Slides - wheel
R___ Rotation
F___ Focus
M___ Fade - in time
PS__ Smooth PAN - movements (16 Bit)
TS__ Smooth TILT - movements (16 Bit)
28