Dimensional Drawings - Sharp PN-655RU Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Dimensional Drawings

Note that the values shown are approximate values.
1
7
/
[6]
5-
4
[150]
When mounting the monitor, read the manual of the brackets or stand for their mounting procedure.
The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor. Note
that screw hole depth of the monitor is 1-
resulting in serious personal injuries as well as damage to the product. The screw and hole should come
together with over
comply with UL1678 standard.
52
E
5
34-
Opening width
3
(31-
/
9
1-
/
16
[40]
5
36-
/
/
8
1
39-
/
3
3
/
inch (20 mm) length of thread. SHARP recommends using mounting interface that
4
/
[871]
16
[807])
4
9
1-
/
16
[40]
[923]
16
[1003]
2
/
inch (30 mm). Loose holding may cause the product to fall,
16
Screw holes for mounting brackets
5
17-
/
[440]
16
Unit: inch [mm]

Publicité

Chapitres

Table des Matières
loading

Table des Matières