Publicité
Les langues disponibles
Les langues disponibles
1.
Open loading door:
Use force to push against the loading door
(push point)
2. Load your laundry (do not force it in).
3. Close loading door securely. Lock must audibly
lock.
Selecting the programme
Use the programme selector to set the programme
you require. The estimated time to end of the pro-
gramme appears on the LCD, e.g.
( hours . minutes ).
During the cycle, time elapses by steps of one mi-
nute.
Delicate (Schon) function
To dry carefully the delicate fabrics with the
care label and for temperature-sensitive textiles
(e.g. acrylic, viscose). Programme is done with de-
creased heat.
The delicate function is only correct for use with
loads of up to 3 kg.
To activate it:
1. Set the drying programme.
2. Push Delicate (Schon) button - the LED above
is on.
To cancel the function push again Delicate (Schon)
button. The LED above is off.
Long anti-crease (Knitterschutz Plus)
function
This function extend anti-crease phase to 90 min.
The drum turns in intervals during this phase. The
laundry remains loose and free from creases. You
can remove laundry during the anti-crease phase.
To set the long anti-crease function:
1. Set the drying programme.
2. Push the Long anti-crease (Knitterschutz Plus)
button - the LED above is on.
To cancel the function push again the Long anti-
crease (Knitterschutz Plus) button. The LED above
is off.
Buzzer (Signal) function
The appliance is supplied with the buzzer function
deactivated.
The buzzer sounds or plays a tune when activated
during:
– cycle end
– anti-crease phase and when phase starts or
ends
– cycle interruption by a warning
– alarm
To set the buzzer function:
1. Set the drying programme.
2. Push the Buzzer (Signal) button - the LED
above is on.
To cancel function push again the Buzzer (Signal)
button. The LED above is off.
Time (Zeitwahl) function
To set time of the drying cycle from 10 min. to 3
hours:
1. Turn the programme dial to the Time pro-
gramme (Zeitprogramm).
2. Push the Time (Zeitwahl) button again and
again until the necessary programme duration
is shown on the display, e.g.
gramme of 20 minutes.
Delay start (Zeitvorwahl) function
The Delay start (Zeitvorwahl) function lets de-
lay the start of a programme from 30 minutes
(30') to 20 hours (20h).
To set the function:
1. Select the drying programme and additional
functions.
2. Push the Delay start (Zeitvorwahl) button again
and again until the necessary delay time is
shown on the display, e.g.
of 12 hours.
3. Push the Start / Pause button to start the delay
countdown.
The delay symbol:
Child lock function
The child lock function:
electrolux 65
for the pro-
for the delay
is on the display.
Publicité
