Warranty; Bagues De Copiage - Triton TGA150 Instructions D'utilisation Et Consignes De Sécurité

Operation
1. Release the plunge lock
lever and rotate the table
winder handle to set the
cut depth
2. Use the calibration marks
on the winder wheel
as a guide for depth
adjustment:
• Each line on the winder
wheel represents an adjustment of 0.2mm cut depth
• A full 360˚ turn is equal to a 2mm adjustment in cut
depth
3. When you have set the cut depth, re-lock the plunge
lock lever. The router is now ready for use

WARRANTY

To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not
be made available to any third party.
PURCHASE RECORD
Date of Purchase: ___ / ___ / ____
Model: TGA150
Retain your receipt as proof of purchase
Triton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to
be defective due to faulty materials or workmanship
within 12 MONTHS from the date of original
purchase, Triton will repair, or at its discretion
replace, the faulty part free of charge.
This guarantee does not apply to commercial use
nor does it extend to normal wear and tear or
damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights.
Table Winder Handle / Warranty
NL
7