Geberit AQUACLEAN CAMA Mode D'emploi page 173

General care instructions
• Never use cleaning agents that contain chlorine
or acid or that are corrosive.
• Never use cleaning agents that are abrasive or
may scratch the surface.
• Never use sharp or pointed objects when
cleaning.
• Make sure that an efficient source of ventilation
and an appropriate room temperature are present
in your bathroom.
• Protect the surface from bleaching due to
extreme light and sun exposure.
Cleaning the surface
WARNING
Danger of fatal electric shock
Incorrect cleaning can lead to death or
serious injuries.
▶ Disconnect the power supply before
carrying out cleaning.
▶ Make sure that all surfaces have dried
completely before reconnecting the
power supply.
1
Clean the surfaces. Please follow the
corresponding care instructions.
2
Dry the surfaces with a soft, lint-free cloth.
27021605942272651 © 07-2024
970.389.00.0(03)
Clean the vacuum pads and spray
nozzle
Prerequisite
– The vacuum pad is dirty and no longer adheres
to the surface.
– The spray nozzle is dirty.
– The spray nozzle and feed pipe must be
replaced after approximately 6 months.
– The water tank is empty.
1
Demount the spray unit and the feed pipe to
clean them.
EN
173