Geberit AQUACLEAN CAMA Mode D'emploi page 168

EN
Establish connection with the
Geberit remote control
The shower procedure can be actuated at
any time – even if no one is sitting down on
the WC seat ring. Ensure that you are sitting
on the WC seat ring before starting the
shower procedure.
▶
Connect the Geberit AquaClean device to
the power supply and press the <+> button
on your remote control for approximately
10 seconds.
✓ Ensure you are in close range of the
device.
✓ The connection is established. This can
take several seconds.
✓ The Geberit AquaClean device is ready
for operation.
168
Establish connection with the
Geberit Home app
1
Connect the Geberit AquaClean device to
the power supply and press the <+> button
on your remote control for approximately
10 seconds.
2
Open the Geberit Home app.
✓ Ensure you are in close range of the
device.
3
Select your country and language and
confirm with [NEXT].
4
Start the search by selecting
[Add (Search for products)].
✓ The Geberit AquaClean Cama is
displayed.
27021605942272651 © 07-2024
970.389.00.0(03)