EN
Cleaning and descaling the device
Care Instructions
You have selected a product with a high-grade surface. Please follow the care instructions below.
The manufacturer does not assume any liability for product damage that arises as a result of incorrect care
and handling.
General cleaning and descaling recommendations
Cleaning the shower toilet at the recommended cleaning intervals will ensure that it functions properly. The
shower toilet must only be cleaned using suitable cleaning agents and cleaning equipment.
ATTENTION
Aggressive descaling agents
Unsuitable descaling agents may cause damage to the device.
▶ Only use Geberit AquaClean descaling agents to descale the device.
▶ Refer to the "Descaling the device" section.
ATTENTION
Aggressive and scouring cleaning agents
Cleaning using aggressive and scouring cleaning agents can cause surface damage.
▶ Use Geberit AquaClean cleaning agents.
▶ Pay attention to the cleaning and care instructions.
Interval
Daily
Weekly
Annually
172
Task
▶ Remove water drops with a soft, lint-free cloth to avoid limescale stains.
▶ Empty the water tank. Clean the water tank and lid with a soft, lint-free
cloth and a suitable cleaning agent. Only fill the water tank with water of
drinking water quality (cold water).
▶ Clean the technics assembly with a soft, lint-free cloth and a suitable
cleaning agent.
✓ Always disconnect the device from the power supply to clean it.
✓ The technics assembly must not be immersed in water.
▶ Check spray nozzle including vacuum pads and clean or replace if
necessary. → See "Clean the vacuum pads and spray nozzle",
page 173.
▶ Descale your device. → See "Descale the device", page 174.
27021605942272651 © 07-2024
970.389.00.0(03)