ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku declares that the WK403240 mixer is in ac-
cordance with the following Directives and Stan-
dards:
2014/30/EU
2006/42/EC
EN 62841-1:2015+AC:15
EN 62841-2-10:2017
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
La Coruña, Spain, 01/01/2023
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency ................. 230-240V~50/60 Hz
Power ......................................................... 1600W
Mixing capacity ............................................. 100 kg
Class .................................................................. II
Protection index ........................................... IP20
Speed rate range I ............................ 200-480 min
Speed rate range II .......................... 250-680 min
Speeds .................................................... 12 (6x2)
Spindle ..................................................... HEX13
Mixer diameter .......................................... 120 mm
Mixer length .............................................. 550 mm
Net weight .................................................. 6.4 kg
Acoustic pressure LpA .......................... 84.0 dB(A)
Respective uncertainity KpA ...................... 3 dB(A)
Acoustic pressure LwA ......................... 95.0 dB(A)
Respective uncertainity KwA ..................... 3 dB(A)
Vibration Ah ........................................... 4.21 m/s²
Respective uncertainity Kh ....................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been measu-
red in accordance with a standard test method and
may be used for comparing one power tool with
another. The declared vibration total value may
also be used in a preliminary assessment of expo-
sure. Warning: vibration emission during actual use
of this power tool can differ from the declared total
value depending on the ways in which this power
tool is used. Warning: identify safety measures to
protect the operator, based on an estimation of ex-
posure in the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear respiratory protection
Wear ear protection
Double insulation
European conformity
2012/19/EU Directive - Waste
Electrical and Electronic Equipment
SAFETY INSTRUCTIONS.
-1
This power tool is intended to function as a mixer.
-1
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Keep all warnings and all instructions for future re-
ference. Accidents can be avoided in many cases
by recognizing a potentially hazardous situation
before it occurs and by observing appropriate safe-
ty procedures. Operations, such as grinding, wire
brushing, polishing or cutting-off are not recom-
mended to be performed with this power tool. Ope-
rations for which this power tool was not designed
may create a hazard and cause personal injury.
IMPORTANT SAFETY INSTRUCTIONS FOR
MIXERS.
1) Hold this power tool with both hands at the in-
tended handles. Loss of control can cause personal
injury.
2) Ensure sufficient ventilation when mixing flam-
mable materials to avoid a hazardous atmosphere.
Developing vapour may be inhaled or be ignited by
the sparks this power tool produces.
3) Do not mix food. This power tool and its acces-
2
English
Intertek-GS certification