Publicité
Les langues disponibles
Les langues disponibles
CONTROLS SET-UP THROUGH USB
To access the USB setup menu, navigate to set-up code
2.xx (special pricing option). Pressing HEAVY DUTY keypad
activates the help mode sub-menu. The first sub-mode within
the help mode is USB option. Press HEAVY DUTY keypad at
any time to exit help mode.
Submode Description
USB
While on this screen, press
the HEAVY DUTY button to
enter into USB menu. USB
menu allows for software
update and import/export
machine settings.
USB MENU
To access USB menu enter into Help Mode. While on the USB
screen press the HEAVY DUTY key. To advance through the
USB sub menu, use the NORMAL key. The DELICATES key is
the Select key. Press the HEAVY DUTY keypad at any time to
exit USB Menu.
In order to complete any of the USB functions, both dryers
must not be running a cycle, a payment must not be in process,
and both dryer doors should be opened.
See page 19 for location of the USB Port on the appliance
and instructions for how to install a USB Stick onto the
appliance and to remove a USB stick from the appliance.
Code
Explanation
U0.00
USB drive Inserted? (Status only)
U0.00
This will be displayed if USB drive is NOT
detected.
U0.01
This will be displayed if USB drive is detected.
Press the NORMAL key once to advance to next code.
U1.00
Programming Mode
U1.00
This will be displayed if USB drive not detected.
U1.01
This will be displayed if USB drive is detected.
If you wish to reprogram the controls Press the
DELICATES key 3 times. Display will toggle
between U1.01 and ProG and then --.-- while
programming in process. Please wait until process
is complete, this could take several minutes. After
software is successfully downloaded to machine,
the control could take several minutes to reset.
After reset is complete the machine will return to
customer mode or service mode depending on
Service Switch status.
donE
Display will toggle between U1.01 and donE when
programming finished successfully for 5 seconds.
Display will then return to main Service Menu.
FCE4 or
If the software programming was unsuccessful the
FCE5
display will toggle between U1.01 and FCE4 or FCE5
for 5 seconds. Display will then return to main Service
Menu.
Press the NORMAL key once to advance to next code.
18
Code
U2.00
U2.00
U2.01
Note
Allows user to
enter USB menu.
donE
See USB MENU
section for more
info.
FCE4 or
FCE5
Press the NORMAL key once to advance to next code.
U3.00
U3.00
U3.01
donE
FCE4 or
FCE5
Press the NORMAL key once to advance to next code.
U4.00
U4.00
U4.01
donE
FCE4 or
FCE5
Press the NORMAL key once to advance to next code.
END of SET-UP PROCEDURES.
EXIT FROM SET-UP MODE
■
Explanation
Export Machine Settings to USB Drive.
This will be displayed if USB drive is not detected.
This will be displayed if USB drive is detected. If
you wish to export machine settings to USB drive
press the DELICATES key 3 times. Display will
toggle between U2.01 and ProG and then --.--
while export in process.
Display will toggle between U2.01 and donE
when export finished successfully for 5 seconds.
Display will then return to main Service Menu.
If the export was unsuccessful the display will
toggle between U2.01 and FCE4 or FCE5 for 5
seconds. Display will then return to main Service
Menu.
Import Machine Settings from USB Drive.
This will be displayed if USB drive is not detected.
This will be displayed if USB drive is detected. If
you wish to import machine settings from USB
drive to machine press the DELICATES key 3
times. Display will toggle between U3.01 and
ProG and then --.-- while import in process.
Display will toggle between U3.01 and donE
when import finished successfully for 5 seconds.
Display will then return to main Service Menu.
If the import was unsuccessful the display will
toggle between U3.01 and FCE4 or FCE5 for 5
seconds. Display will then return to main Service
Menu.
Export Machine Settings to USB Drive.
This will be displayed if USB Drive is not detected.
This will be displayed if USB drive is detected.
If you wish to export machine audit data to USB
drive press the DELICATES key 3 times. Display
will toggle between U4.01 and ProG and then --.--
while export in process.
Display will toggle between U4.01 and donE
when export finished successfully for 5 seconds.
Display will then return to main Service Menu.
If the export was unsuccessful the display will
toggle between U4.01 and FCE4 or FCE5 for 5
seconds. Display will then return to main Service
Menu.
Turn Access Panel Key back to original position.
Publicité
