Maytag Commercial MLE27PDFGW Instructions D'installation page 16

Code
If cycle counter (9 0C) is selected, the following is true:
1 00 Cycles in HUNDREDS
2 00 Cycles in ONES
TOTAL CYCLES = 225
This is "VIEW ONLY" and cannot be cleared.
Press the NORMAL button once to advance
■
to next code.
Mode 1.00 turns on how much money machine has collected
if you would like to keep track of that.
1.00 MONEY COUNTER OPTION*
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
1.00 Not Selected "OFF."
1.0C Selected "ON."
Press the DELICATES button 3 consecutive
■
times to select "ON" and 3 consecutive times
to deselect (Not Selected "OFF"). Counter resets
by going from "ON" to "OFF."
1.C0 Selected "ON" and not able to be deselected.
To select "ON" and not able to be deselected,
■
first select "ON"; then within 2 seconds, press
the DELICATES button twice, the HEAVY DUTY
button once, and exit set-up mode.
Press the NORMAL button once to advance to
■
next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00 Currency amount
in HUNDREDS
4 00 Currency amount
in ONES
5 00 Currency amount
in HUNDREDTHS
Mode 2.00 allows you to set special pricing for instance
different cost and/or different cycle times at specific times of
specific day.
2.00 SPECIAL PRICING OPTIONS
This option is either NOT SELECTED "OFF" or
SELECTED "ON."
2.00 Not Selected "OFF."
2.SP Selected "ON."
Press the DELICATES button once to change this
■
selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes "3.XX" through "9.XX."
Press the NORMAL button once to advance to next code.
■
16
Explanation
1 02 = 200
2 25 = 25
3 01 = 100.00
4 68 = 68.00
5 75 = 00.75
TOTAL = 168.75
Code
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED. IF NOT IN SPECIAL PRICING THESE
OPTIONS ARE IGNORED AND DEFAULTS BACK TO
MODE 6 & 7 TIMES.
SPECIAL CYCLE AMOUNT TO START
3.06
3.06 Represents the amount of Coins or Gen 1 Debit
Pulses required to start a Special Cycle.
See Value of Coin 1 setting.
Advance from 0–39 by pressing the HEAVY
■
DUTY button. Factory Default is 3.06.
PR MODELS ONLY: Factory default of 0 coins.
3.00
Press the NORMAL button once to advance to
■
next code.
4.05 SPECIAL DRY TIME
4.05 PD MODELS: Represents the number of minutes
per coin (coin 1).
Factory default of 5 minutes per coin.
■
Example: 6 coins x 5 minutes = 30 minutes.
By pressing the HEAVY DUTY button, the value
■
can be adjusted from 1 to the maximum minutes.
4.45 PR MODELS: Represents the cycle length for free
cycles. Example: "4 45"= 45 minutes.
Press the NORMAL button once to advance to
■
next code.
TIME-OF-DAY CLOCK, MINUTES
5.00
5.00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the HEAVY DUTY
button.
Press the NORMAL button once to advance to
■
next code.
TIME-OF-DAY CLOCK, HOURS
6.00
NOTE: Uses 24 hours clock.
6.00 This is the TIME-OF-DAY CLOCK, hour setting;
select 0–23 hours by pressing the HEAVY DUTY
button.
Press the NORMAL button once to advance to
■
next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses 24 hours clock.
7. 00 This is the start hour, 0–23 hours.
Select START HOUR by pressing the HEAVY
■
DUTY button.
Press the NORMAL button once to advance to
■
next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses 24 hours clock.
8. 00 This is the stop hour, 0–23 hours.
Select STOP HOUR by pressing the HEAVY
■
DUTY button.
Press the NORMAL button once to advance to
■
next code.
Explanation