Installation - Pioneer PRA-DW11 Mode D'emploi

Installation

Precautions Regarding Static Electricity
7 When handling this unit, be very cautious never to touch any of the connectors
or terminals, to prevent damage due to electrostatic discharge.
NOTE:
÷ Installation of this unit requires a high level of technical expertise; for this reason, and
to assure safe operation, installation is to be performed by authorized Pioneer service
personnel. For details, consult your dealer.
÷ Loose mounting screws may allow disc rotation to cause sound distortion, or the unit
may fall, leading to personal injuries and physical damages to the unit or other materials.
Be sure that all mounting screws are fastened securely.
÷ Use only the designated mounting screws. Use of threaded fasteners other than those
designated may result in damage to the unit and DVD recorder PRV-LX1.
÷ To prevent hazard of fire, electrical shock, and potential electronic damage to the unit, be
sure to detach all cables and the power cord connected to the main unit PRV-LX1 before
beginning installation.
1. Remove PRV-LX1's top panel.
÷ Remove the top panel's 7 screws,
then the top panel itself.
2. Remove the drive 2 cosmetic
panel.
÷ To prevent the cosmetic panel
from dropping, hold it in place
while removing the two panel
installation screws (the two
screws will be used to install the
drive 2 frame in step 3).
* When removing the two screws,
work carefully to avoid dropping the
screws inside the unit.
8
PRA-DW11
En
Top panel
Drive 2 cosmetic panel
Drive 2 cosmetic panel