Burley Dash MIK HD Manuel D'instructions page 9

Checking the Alignment of the Bicycle Seat
A
B
1
The Bicycle Seat has a Center of Gravity Indicator, which is marked on the outer plastic shell .
A
The Center of Gravity Indicator MUST be positioned either: In front of the bicycle's rear
wheel axle; or No more than 3.93 in (10 cm) behind the bicycle's rear wheel axle .
B
If the Center of Gravity Indicator is more than 3.93 in (10 cm) behind the bicycle's
rear wheel axle, the Bicycle Seat must be moved forward on the rack until it is
correctly positioned. The seat should be installed as close to saddle as possible.
note
Ensure the Bicycle Seat is mounted securely to the rack by following the instructions in the "Attaching the
Bicycle Seat to your Bicycle" section before proceeding to the next step.
WARNING
THIS STEP IS EXTREMELY IMPORTANT FOR
THE SAFETY OF THE CHILD.
9
DASH MIK HD ASSEMBLY & USE
ENG FRA ESP