Burley Dash MIK HD Manuel D'instructions page 8

Attaching the Bicycle Seat to Your Bicycle
Angle the seat forward and apply a
slight forward motion when placing
it onto the rack. This will clip the
front of the seat into the rack.
Removing the Bicycle Seat to Your Bicycle
Detach the Safety Strap by
releasing the buckle.
8
ASSEMBLY & USE
1
1
ENG
To secure the rear of the seat onto the rack, first
push down on the top of the securing lever, then
push the lever in. The rear of the seat will now be
able to fully lower onto the rack and lock when
the lever is released. You should hear a click and
a green indicator should be visible on the top of
the lever when the seat is secured to the rack.
Pull on the seat to ensure it is fully engaged.
Push down on the top of the securing lever
and then push the lever in. While pushing the
lever in lift the bicycle seat off the bicycle rack.
FRA ESP
2
2
BURLEY.COM