Burley Dash MIK HD Manuel D'instructions page 15

Adjusting the Harness
1 2
The shoulder straps can be adjusted to two Rotate the Harness Connector
positions according to the child's size. sideways, and slide it through the
Access the Harness Connector via lower harness adjustment hole
the rear of the Bicycle Seat. and the slot in the seat pad.
3 4
Pass the Harness Connector through Repeat steps 1–3 for the other shoulder
the upper harness adjustment hole strap. Ensure that harness straps are not
only (not the seat pad), then rotate twisted during harness adjustment
the Harness Connector so that it is
secure against the rear seat back.
note
If you are adjusting from the upper harness
position to the lower harness position, the Harness
Connector will need to be passed back through the
slot in the seat pad before passing it through the
lower harness adjustment hole.
15
DASH MIK HD ASSEMBLY & USE
ENG FRA ESP