Burley Dash MIK HD Manuel D'instructions page 13

Securing the Child
1 2
Before securing the child in the Bicycle Seat, ensure To ensure the child's safety, secure their
that the bicycle is stable, and the Bicycle Seat is feet using the straps on the footrest.
securely attached to the bicycle. After the child Make sure that the child is comfortable
is placed in the Bicycle Seat, secure and adjust and that the straps are not too tight.
the harness. Snap shoulder straps & waist straps
note
into 5-point harness buckle and adjust straps so
they fit securely. this can be done by loosening or
See the "Adjusting the Footrests" section wfor
tightening the adjustment points on each of the 5
instructions on how to adjust the Footrest height.
harness straps.
WARNING
AVOID SERIOUS INJURY
FROM FALLING OR
SLIDING OUT. ALWAYS
USE 5-POINT HARNESS.
3
To remove the child, press the yellow
release button on the 5-point harness.
13
DASH MIK HD ASSEMBLY & USE
ENG FRA ESP