Burley Dash MIK HD Manuel D'instructions page 10

Adjusting the Alignment of the Bicycle Seat
To adjust the position of the seat on the
rack, locate the bracket that secures the
MIK HD mounting system to the seat.
Remove the bracket by rotating the nut
counter-clockwise with a 13mm wrench.
Align the Mounting Rails with the underside
of the Bicycle Seat (position 1 or 2) so that
the Horizontal position of the Bicycle Seat
is appropriate. Refer to the "Checking the
Alignment of the Bicycle Seat" section.
10
ASSEMBLY & USE
1
3
ENG
Flip the Base Plate away from the Bicycle
Seat and remove it from the slots on
the underside of the Bicycle Seat.
Insert the metal Base Plate into the
slots on the underside of the Bicycle
Seat
A
FRA ESP
2
B
A
4
, and flip it closed
B
BURLEY.COM
.