Publicité
Les langues disponibles
Les langues disponibles
How to Use
EN
3. Clean and dry mop pads after dust emptying
After the robot finishes a cleaning task and returns to the base station to
charge, the base station will automatically start emptying the dust bin, and
then clean and dry the mop pads.
Note:
·
When the robot returns midway to the base station to clean mop pads, the base
station will not automatically empty the dust bin.
·
If the auto-empty function is turned off in the app, the base station will not
automatically empty the dust bin.
·
The base station will empty the dust bin according to the frequency set in the app.
4. Clean the used water tank
After the robot has completed the task, please clean the used water tank to
avoid any odor.
14
Sweeping
1. To use only the sweeping function, select "Sweeping" on the app, or remove
the mop assembly from the robot and the robot will automatically switch to
the sweeping mode.
Note: If the mop assembly is not removed from the robot, you can select the
sweeping mode on the app, and the robot will automatically lift the mop assembly
before sweeping.
2. Make sure that the base station is connected to power and the robot is
connected with the base station. Press the button
app to send the robot to clean all areas from the base station.
Note: To ensure the robot can easily return to the base station after cleaning, it is
recommended to make the robot start from the base station and avoid moving the
base station during cleaning.
on the robot, or use the
Publicité
