Morso Spin Mode D'emploi page 21

IF THERE IS A FIRE
• If the fire is at the Morsø Forno Spin, turn the gas off
at the cylinder.
Smother the flames with a wet cloth, fire blanket or
extinguish using a fire extinguisher.
• If the fire is at the cylinder, or you can not get to the
valve to turn the gas off, contact the fire brigade im-
mediately.
• Using a garden hose , direct the wat er to the middle
of the cylinder to keep it cool. Try not to extinguish the
flame. At least if the gas is burning, it won't be able to
builduppressure and explode.
LOCATION OF YOUR MORSØ FORNO SPIN
DO NOT use your Morsø Forno Spin in garages, porches,
sheds, breezeways, or other enclosed areas.
Your Morsø Forno Spin is to be used OUTDOORS.
The Morsø Forno Spin is not to be installed in or on
recreational vehicles and/or boats and should not be
placed under any surface that will burn. Do not obstruct
the flow of combustion and ventilation air around the
Morsø Forno Spin housing.
PROTECT CHILDREN
Keep children away from Morsø Forno Spin during use
and until Morsø Forno Spin has cooled after you have fin-
ished. Do not allow children to operate Morsø Forno Spin.
Always ensure that no sporting or physical activities are
carried out in close proximity to the Forno Spin during
use and while still hot.
Appliance Category
Gas and Supply
Pressure
Applicable Country Codes BE,CH,CY,CZ,ES,FR,GB,
Burner
Nominal Heat Input
Burner Injector Size
Total Heat Input
1 I3+(28-30/37)
G30 Butane 28-20 mbar
G31 Propane 37 mbar
GR,IE,IT,LT.LU,LV,PT,SK,SI
Main Burner x 1
6kW
Ø 1,24 mm
6 kW (G30:466g/h : G31:456g/h)
TOOLS YOU WILL NEED
17 mm spanner (or an adjustable spanner )
CHECK MORSØ FORNO SPIN FOR ANY DAMAGE
Inspect Morsø Forno Spin parts as you proceed. Con-
tact your supplier for assistance regarding replacement
of any damaged or missing parts. Do not assemble or
operate a Morsø Forno Spin that appears damaged.
Morsø Forno Spin is intended for use with gas cylinders
are labelled propane and butane gass mix. Check label-
ling at the gas connection on your Morsø Forno Spin..
SUITABLE GAS TANK
The maximum tank size:
Capacity of gas tank: Maximum 11 kg
Height of gas tank: Maximum 595 mm
Diameter of gas tank: Maximum 304 mm
Location of gas tank
Make sure there are no kinks in the gas hose. The gas
hose may be a maximum of 1 m in length.
The gas bottle may not be exposed to heat. Make sure
you keep sufficient distance between the bottle and the
Morsø Forno Spin.
1 I3 B/P(30)
G30 Butane or G31
Propane 30 mbar
BE,CY,DK,EE,FR,GB,HU,IT,
LT,NL,NO,SE,SI,SK,RO,HR,
TR,BG,IS,LU,MT,FI
Main Burner x 1
6kW
Ø 1,24 mm
1 I3 B/P(50)
G30 Butane or G31
Probane 50 mbar
AT,CH,DE,SK
Main Burner x 1
6kW
Ø 1,05 mm
21