16
FILTER LOCATION
FAA MAINTENANCE CHART
Maintenance Required
Check and Clean
Electrostatic Filters
Check and replace
MERV8 / MERV13 Filter
Check Heat Recovery Core
Check Drain Pan and Lines
Vacuum the Inside of the Unit
Clean and Un-block Outside
Hoods
Clean and Inspect Duct
Work
General Servicing by a
Qualified Contractor
* Schedule may be altered to meet your own needs. More frequent servicing may be required depending on the severity of your home's indoor and outdoor environments.
Contractor
Recommended Frequency
Every 3 months or if dirty
Every 3 months or if dirty
Every 6 months
Every 3 months
Annually
Annually
Annually
Annually
Telephone Number
Date Maintenance Performed
Date Serviced
MERV8 / MERV13
Filter (Optional)
Electrostatic
Filters