Home Decorators Collection CARLEY CF2003-W Guide D'utilisation Et D'entretien page 8

Assembly - Hanging the Fan (continued)
3
Attaching the coupling cover, and
canopy to the downrod
□
Slip the coupling cover (F), canopy cover (C) and canopy (B)
onto the downrod (E).
□
Carefully reinstall the hanger ball (D) onto the downrod (E),
and ensure that the cross pin (MM) is in the correct position,
the hanger ball set screws (NN) are tight, and the wires are
not twisted.
Figure 3
4
Hanging the fan motor assembly to the
mounting bracket
□
Lift the fan motor assembly (G) into position, and place
the hanger ball (D) into the mounting bracket (A). Rotate
the fan motor assembly (G) until the groove of the hanger ball
(D) drops into the registration slot and seats rmly.
The downrod (E) should not be able to rotate if this is done
correctly.
□
Align a Screw-ST4.8x35 (V V) through the washers - D5 (UU),
washers -D15 (TT) and safety rope (Q) and then x the safety
rope (Q) through the outlet box on the ceiling.
8
A
Figure 4
Q
V V
Q
T T
UU