Remote Operation
Remote control
Your fan is equipped with a remote control to operate the speed and
lights of your new ceiling fan.
effect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
ceiling. This allows you to set your heating unit on a cooler setting
without affecting your comfort.
Preparing the Remote Control
the
Warm weather
Pairing one remote to one ceiling fan
□
Before you begin, con rm that the power to all fans is off at either the
wall switch or breaker box, in order to eliminate the possibility of
pairing more than one fan to the same remote.
□
Return power to the fan which need paired, and within 30 seconds,
press and hold the light on/off button
□
If pairing is successful, there will be a "click" sound.
Cool weather
Pairing multiple fans to one remote
□
Repeat the above process for each fan that is being paired to the
one remote. Ensure the other fans power that are not being paired
are powered off.
To unpair one remote to one ceiling fan
□
Repeat the above process for unpairing.
13
NOTE: The remote and fan that come in the box are already paired.
Install new fans and their accompanying remotes.
NOTE: The remote control battery will weaken with age and should be
replaced before leaking takes place, as this will damage the remote
control. Dispose of used battery properly and keep the battery out of the
reach of children.
NOTE : The Ceiling fan is not suitable for pairing multiple remote
controls to one ceiling fan.
ON
OFF
Please contact 1-877-592-5233 for further assistance.
for 5 seconds and release.
HOMEDEPOT.CA/Hubspace