Home Decorators Collection CARLEY CF2003-W Guide D'utilisation Et D'entretien page 14

Remote Operation
Icon Button Name
6 Speed LED
All ON/OFF
Fan ON/OFF
Light ON/OFF
Fan Speed
6 SPEED
6 VITESSE
Brightness Change
BRIGHTNESS
LUMINOSITÉ
Comfort Breeze
BREEZE
BRISE
Color Temperature
(CCT) Change
COLOR TEMP.
TEMP. COULEUR
2
HR
4
Timer Buttons
HR
8
HR
Fan Direction
NOTE: On start up your ceiling fan will oscillate back and forth. This is NORMAL OPERTATION for DC ceiling fan as it goes
through its calibration cycle. The fan is NOT DEFECTIVE.
NOTE: Ceiling fan power on within 30 seconds, press and hold the light power button above 5 seconds to pair between
remote
and ceiling fan or cancel the pairing.
NOTE: Press and hold the fan power button above 5 second to reset factory default setting, reset status will be closed
after 2 seconds. Factory default setting: 3000K, 100% brightness, fan foreward ,fan speed is level 6.
NOTE: Disconnect the power supply or wall control switch as a way to override intelligent or remote control.
Action
Change the fan speed will light
up different quantity of indicators
Short press to turn the Fan and light
on/off
Short press to turn the fan on/off
Long press for 5 seconds to reset factory
default setting
Short press to turn light on/off
Long press for 5 seconds to initiate
pairing process
Short Press the button "＋"to increase
fan speed
Short Press the button "－"to decrease
f an speed
Short Press the button "＋"to increase
light brightness
Short Press the button"－"to decrease
brightness
light
Hold for 3 seconds to increase or
decrease light level at a smooth curve
Short or long press to enter Breeze mode
Short or long press to exit Breeze mode
Short press to adjust color
temperature
Short press to select the desired timer
Long press for 3 seconds to cancel timer
Long press for 3 seconds to change fan direction downward
Long press for 3 seconds to change fan direction upward
Notes
The brightness and CCT will be
same as your last setting when
turned on.
The default fan speed is level 6.
If pressing while the light is off; the
light will turn on the last setting of
brightness and CCT.
The factory default is 100%.
In breeze mode , the fan speed
will vary (increase or decrease)
automatically. The fan will not be set
to a xed speed in this mode.
The default CCT is 3000K.
There are 6 color temperatures to
choose from: 2700K, 3000K, 3500K,
4000K, 5000K and 6500K.
The timer is set for the fan.
14
ALL / TOUT
ON / OFF
ON / OFF
MARCHE / ARRÊT MARCHE / ARRÊT
6 SPEED BRIGHTNESS
6 VITESSES LUMINOSITÉ
BREEZE COLOR TEMP.
BRISE TEMP. COULEUR
2 4 8
HR
HR HR
TIMER / MINUTERIE
SUMMER WINTER
ÉTÉ HIVER
FAN DIRECTION
DIRECTION DU VENTILATEUR
HOLD / MAINTENIR 3 SEC.