Home Decorators Collection CARLEY CF2003-W Guide D'utilisation Et D'entretien page 10

Assembly - Hanging the Fan (continued)
6
Securing the canopy to the mounting
bracket
□
Loosen two mounting bracket screws (RR) away from the
mounting bracket (A) leaving about 3/4 spacing.
□
Attach the canopy (B) key shape hole to the mounting bracket
screws (RR) previously unscrewed and clockwise rotate the
canopy (B) clockwise.
□
Tighten the mounting bracket screws (RR).
□
Align the key holes on the inside of the canopy cover (C) with
the screws (RR). Push up the canopy cover(C) until the screw
(RR) heads engage to the key holes on the canopy cover (C),
and rotate the canopy cover (C) counterclockwise until it is
attached to the bottom of the canopy (B) tightly.
The key shape
hole inside
Figure 8
RR
Figure 7
7
Install the blades
□
Remove all blade screws (GG) from the rotary plate (SS) of fan-motor
assembly (G).
□
Insert the blades (K) into holes of the rotary plate (SS) in place.
□
Reattach all blade screws through the blade washers and tighten
all screws to make sure the blades (K) are secure.
NOTE: The blade with "this side up" label must face upwards,
otherwise it cannot be installed correctly.
SS
GG
GG
10
This side up
de ce côté-ci
Figure 9
SS
Figure 10