Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NL
sition.
SPECIFICATIONS
can be
Model
Power
other
Number of speeds
Oscillation
than
Tilt adjustment
Oscillation switch
aning
Number of blades
Blade material
Grill material
Do not
Grill diameter
liance
Removeable grill
Handle
d the
Voltage
Frequency
gularly
Product dimensions (LxDxH)
Product weight
re not
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
ective
1. Please read these instructions carefully before using the
appliance and keep them in case of future use.
ve fan
2. Make sure that the voltage of your local electricity network
th the
corresponds to the one which appears on the appliance.
3. Before using it for the first time, remove the appliance's
protective tabs and stickers.
rd for
ASSEMBLY
alls or
Unpack your appliance and carefully remove the packaging
w may
around the fan.
•
Place the base (15) on a flat floor then take the parts for
assembling the stand (9-14).
•
Remove the fixing screw for the stand (16) which is on
the main ventilator stand (14).
•
Then insert the main ventilator stand into the hole in the
base (15) and tighten the fixing screw (16) firmly at the
bottom of the base.
•
Unscrew fixing screw B (13) to adjust the fan stand to the
required height then firmly retighten fixing screw B (13).
•
Unscrew fixing screw A (11), connect the motor housing
(9) to the top of the inner fan stand (12) then firmly
retighten fixing screw A (11).
•
Remove the blade centre cap (2) and the safety nut (4)
which is on the motor housing (6).
•
Then firmly attach the back grill (5) to the motor housing
(9), making sure that the fan handle is pointing upwards.
•
Replace and firmly tighten the back grill safety nut (4).
•
Place the blades (3) onto the motor shaft (6), replace the
blade centre cap (2) and tighten firmly.
•
Attach the front grill (1) to the back grill (5), use the fixing
clip to fix it together and tighten the safety screw (17)
firmly.
For safety reasons, before switching the appliance on,
ensure that the grill has been firmly attached.
.com
www.ewt-france.com
Woodair_S.indd 9
INSTRUCTION FOR USE
WOODAIRS
•
Plug the appliance into mains socket (220-240V, 50Hz)
60W
using the electrical cable (10).
3
•
Activate the fan by turning the speed control button (7)
Yes: automatic
and selecting the air speed required: "1" indicates SLOW
Yes: manual
speed, "2" indicates MEDIUM speed, "3" indicates HIGH
Yes
speed and "0" indicates that the fan is switched off.
4
•
Press the oscillation button (8) to activate oscillation
Metal
of the fan and pull on the oscillation button (8) to stop
Metal
oscillation and keep the fan in a fixed position.
40cm
•
To set the air flow upwards or downwards, set the fan to
Yes: easy to clean
a central position then raise or lower the motor housing
Yes
(9) in the required direction.
220-240V~
50HZ
CLEANING AND MAINTENANCE
L45 x D41 x H125
5.6kg
•
Always unplug the appliance before cleaning it.
•
Clean the surface of the appliance using a soft cloth, do
not use any water.
•
If the appliance is very dirty, clean the surface using a
damp cloth (add a non-corrosive cleaning product if
required.
•
Do not use corrosive detergents, corrosive solvents or
chemical products.
•
Do not use an abrasive sponge, scouring pad or hard
brush to clean the appliance.
•
Do not immerse the main body of the appliance into
water.
•
Ensure that the motor and the other electrical
components do not come into contact with water.
•
If the appliance is not to be used for a long period, pack it
away carefully. Store it in a dry and ventilated area where
it will not be affected by dust.
•
Always unplug the appliance before cleaning it.
•
Clean the surface of the appliance using a soft cloth, do
not use any water.
•
If the appliance is very dirty, clean the surface using a
damp cloth (add a non-corrosive cleaning product if
required.
•
Do not use corrosive detergents, corrosive solvents or
chemical products.
•
Do not use an abrasive sponge, scouring pad or hard
brush to clean the appliance.
•
Do not immerse the main body of the appliance into
water.
•
Ensure that the motor and the other electrical
components do not come into contact with water.
•
If the appliance is not to be used for a long period, pack it
away carefully. Store it in a dry and ventilated area where
it will not be affected by dust.
•
Clean the outer grill using a non-corrosive detergent and
a soft brush.
THIS APPLIANCE IS DESIGNED FOR DOMESTIC USE ONLY
FR
EN
NL
9
5/11/18//45 22:00
Publicité
Table des Matières
