Basic Operations; Playing A Dvd - Sony DVP-S7700 Mode D'emploi

Basic Operations

Basic Operations

Playing a DVD

Adjust the headphone
Connect headphones.
• The operating procedure of CDs
or VIDEO CDs is different from
that of DVDs.
For details, see pages 14 to 17.
z
You can turn on the player
using the remote
Press 1/u when the
indicator above the 1/u
button on the front panel is
lit in red.
* DTS indicator lights up when
you play DTS sound tracks on
a DVD. In this case, no sounds
will come out from the LINE
OUT (AUDIO 1, 2) and
PHONES connectors. To enjoy
the DTS sounds, you have to
connect an audio component
with a built-in DTS decoder
(see page 32).
z
After following Step 4
A DVD menu or title menu
may appear on the TV screen
(see page 13).
Depending on the DVD, some operations may be different or restricted. Refer to the instructions supplied with
your disc.
US
10
2
volume.
DTS indicator*
1
Make settings on your TV.
Turn on the TV and select the video input so that you can view
the pictures from this player.
When using an amplifier
Turn on the amplifier and select the appropriate position so that
you can listen to the sound from this player.
2
Press 1/u to turn on the player.
The indicator (red) above the 1/u button changes to green and
the front panel display lights up.
3
Press §, and place the disc on the disc tray.
With the playback
side facing down
4
Press ·.
The disc tray and front panel close, and the player starts
playback (Continuous Play). Adjust the volume on the TV or
the amplifier.
To open or close the front panel
Press UP/DOWN on the player.
4 3
UP/DOWN