Glossary - Sony DVP-S7700 Mode D'emploi

Specifications
CD/DVD player
Laser Semiconductor laser
Signal format system NTSC
Audio characteristics
Frequency response DVD (PCM96kHz): 2 Hz to 44 kHz
(±0.5 dB)*
DVD (PCM48kHz): 2 Hz to 22 kHz
(±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 115 dB (LINE OUT (AUDIO
1, 2) connectors only)
Harmonic distortion Less than 0.0025%
Dynamic range DVD: More than 100 dB
CD: More than 97 dB
Wow and flutter Less than detected value
(±0.001% W PEAK)
Outputs and inputs
Output
Jack
type level
Phono 2 Vrms
LINE OUT
(at 50 kilohms)
(AUDIO 1, 2) jacks
–18 dBm
DIGITAL OUT Optical
output
(OPTICAL)
connector
0.5 Vp-p
DIGITAL OUT Phono
jacks
(COAXIAL)
1.0 Vp-p
LINE OUT Phono
jack
(VIDEO 1, 2)
4-pin mini Y: 1.0 Vp-p
S VIDEO OUT
DIN
1, 2
C: 0.286 Vp-p
Y: 1.0 Vp-p
COMPONENT Phono
jacks
VIDEO OUT
(Y, P /B-Y,
B
P /B-Y,
P /R-Y) B
R
P /R-Y:
R
0.7 Vp-p
12 mW
Phone
PHONES
jack
Minijack
S-LINK
General
Power requirements
120 V AC, 60 Hz
Power consumption
19 W
17 × 4 3/8 × 13 1/4 inches (430 × 111 ×
Dimensions (approx.)
335 mm) (w/h/d)
incl. projecting parts
Mass (approx.) 15 lb 7 oz (7.0 kg)
Operating temperature 41 ˚F to 95 ˚F (5 ˚C to 35 ˚C)
Operating humidity 5% to 90%
Supplied accessories
* When you play the PCM sound tracks with 96 kHz sampling
frequency, the output signals from the DIGITAL OUT
(OPTICAL, COAXIAL) connectors are converted to 48 kHz
(sampling frequency) / 16 bits (quantization bits).
Design and specifications are subject to change without notice.

Glossary

Bit rate
Value indicating the amount of video data compressed
in a DVD per second. The unit is Mbps (Mega bit per
Load impedance
second). 1 Mbps indicates that the data per second is
1,000,000 bits. The higher the bit rate is, the larger the
Over 10 kilohms
amount of data. However, this does not always mean
that you can get higher quality pictures.
Wave length: 660 nm
Chapter
Sections of a picture or a music piece on a DVD that are
smaller than titles. A title is composed of several
75 ohms terminated
chapters. Each chapter is assigned a chapter number
enabling you to locate the chapter you want.
75 ohms,
sync negative
Dolby Digital (AC-3)
75 ohms,
sync negative
Digital audio compression technology that the Dolby
75 ohms terminated
Laboratories Corporation developed. This technology
75 ohms,
conforms to 5.1-channel surround. The rear channel is
sync negative
stereo and there is discrete subwoofer channel in this
format. Dolby Digital provides the same 5.1 discrete
channels of high quality digital audio found in Dolby
75 ohms
Digital cinema audio systems.
32 ohms
Dolby Pro Logic
Audio signal processing technology that Dolby
Laboratories Corporation developed for surround
sound. When the input signal has the surround
component, the Pro Logic process outputs the front,
center and rear signals. The rear channel is monaural.
DTS
Digital audio compression technology that the Digital
Theater Systems, Inc. developed. This technology
conforms to 5.1-channel surround. The rear channel is
stereo and there is discrete subwoofer channel in this
format. The good channel separation is realized
because the all channel data is recorded discrete and
processed in digital.
Additional Information Additional Information
Additional Information Additional Information
See page 6.
(page 19)
(page 5)
(page 32)
(page 32)
US
43