Publicité
Les langues disponibles
Les langues disponibles
G
B
TECHNICAL DATA / INSTALLATION
TOUCH EN12978 is a device for guaranteeing protection
of persons and property from impact or entrapment with
moving mechanical automatic gate or door parts. The
obstacle is detected along the entire length of the device
in axial and perpendicular movement.
The device has been certified EN 12978 (2003-05) No.
05.081 category EN 954-1 2/3.
The device may not be modified in any manner.
T
YPE OF ITEMS FOR ASSEMBLY
TOU0001
TOU0002
TOU0003
TOU0004
TOU0006
A
SSEMBLY INSTRUCTIONS
The device requires installation by skilled, expert and qualified
personnel.
TOUCH EN12978 can either be mounted on the mobile or fixed part of
the gate or door. In either case the purpose of the device is to prevent
damage or injury from crushing or impact.
Electric contact capacity
Operating temperature
Rubber profile stroke to the electric contact intervention
Rubber profile stroke from intervention (extra-stroke)
Contact opening intervention time
Maximum deformation recuperation time
Maximum applicable force of device
Maximum speed of device in movement
* If you install TOUCH with gate leaves having a travelling speed higher than 0.25m/s, the safety
norm cannot be abide by.
Rubber profile available
in packages of n° 2 items
7 m length
Aluminium profile available
in strips from 2 m
Steel cable
Upper group
Upper cover
Screws for upper cover
Register
TECHNICAL CHARACTERISTICS
TOU0007
TOU0008
TOU0009
TOU0010
TOU0011
Positioning of the device is shown in examples in Pic. 1.
TOUCH EN12978 must be fixed to the aluminium rail, with its leading
rubber edge facing in the direction of any eventual impact as indicated
in Pic. 1.
0,5 A - 24 V ac/dc
min. -20°C, max 50°C
max. 15 mm
min. 40 mm
max. 0,1 sec.
max. 0,5 sec.
max. 1 KN
max. 0,25 m/sec.*
Steel flat connector
Lower group
Lower cover
Screws for lower cover
Lower cover with fastening
screws
Upper cover with fastening
screws
Accessories for assembling
Aluminium profile
Publicité
