Pfaff 948/51 Série Instructions Complémentaires page 9

1 Using standard presser feet
.05
Fig. 3
2
3
1 mm
● With the adapter 1, which belongs to the
accessories, standard presser feet can
also be used.
● Mount adapter 1 as shown in Fig. 3.
● Loosen screw 2 and push puller arm 3
back.
● Screw the presser foot onto adapter 1.
● Adjust puller arm 3 so that there is a
clearance of approx. 1 mm between the
puller roller and the presser foot.
● Tighten screw 2.
1
GB
9